[Chance301]

yo if enough people post some good recipes this should be stickied...

first of all if you dont know how to make your own markers...
you need an eraser (rack them for school or art supply stores), electric tape, a bottle or a carcass to fill, and something to fill it with...

you can use shit like shoe polish carcasses or pilot markers....zig makes a good thick paint marker that you can use the carcass (the paint it comes with is water based and can be scrubbed off so empty it out and dont bother using it)

All you do is fill the empty caracass up with your ink, take a strip of the felt stuff off the eraser and fold it in half and stick it in the opening for the marker, tape the base where the marker ends and the felt begins. find a cap to use for it, and tape it on (shampoo caps, laundry detergent caps, film canisters all work good) and put this in 2 zip lock bags because as soon as it becomes inverted it gets messy as shit. the harder you squeeze and push the drippier itll get....sometimes it can be a lot easier to get a shoe polish bottle and just empty it out and refill it with your ink

heres a recipe i use a lot, this makes enough for about 4 zig markers or 2 1/2 mops

1 bottle black kiwi shoe polish
1 bottle white kiwi shoe polish
1 bottle kiwi shoe cream
1 bottle rubbing alcohol
book of receipts
crayons
carcass to fill

fill a bowl up with the carbon paper from the receipt books, and break a crayon in a few pieces and put that in, pour rubbing alcohol in too. dont drown the paper and caryons, just a little bit of rubbing alcohol will do, mix it up really really good, and leave this sit for awhile (the longer the better...im talkin weeks)
when done, pour that liquid in a bowl

pour equal parts of the black and white kiwi shoe polish in with it...the cream stuff comes out when you twist the bottom of the bottle. gives it 3 or 4 twists and its gonna be really chunky so stir it up really well until everythings smooth. if its still really chunky SLOWLY add a little more rubbing alcohol, too much will thin it out too much

pour that in whatever your writing with and your good to go...
this shits not for people that like clean tags though, if you try to put it on lightly, its gonna thin out on the wall and look like shit, this is strictly if your gonna hit up some drippy, nasty, messy ass tags...its pretty nice with seeping into paint and metal and shit, and its gonna come out a nice nasty dark gray

if you got any recipes that you use feel free to post them here

[aker88]

wat the hell is a carcass

[Chance301]

empty container

[madwakfreek]

the quckest and cleanest way to make a good mop is to get the liquid shoe polish KIWI makes, pop the nib off and pour the polish into a jar. add varnish and brake fluid to the polish and re-fill the container. you can make it as drippy as you like by squeezing it, or just use it regular to cet a clean line.

at the dollar store, you might find one thats got a slanted head.. makes the ink flow MUCH better

[Chance301]

just make sure the dolar store polish is kiwi, if its the cheap shit like pride itll be too thin, and i dunno if the brake fluid and varnish will thicken it or not, i imagine that stuff is to make it permenant?

[GraffitiMachina]

Brake fluid makes it so the tag is nearly un-buffable; there will always be a ghost tag.

And yes, it does thicken it some. To get more technicle, DOT4 brake fluid is a tad but thicker then DOT3.

[Pop N Jay]

do some thread searching i posted a ton of recipes in a thread named something similar to this....and i don't think it should really be stickied, ppl will find it if they find it, no use to tell the whole world ur best recipes.

[aker88]

theres a bunch of recepies on bombing science

[aker88]

heres some crap

deoderant mop:


get one of those roll on deoderant containers and a screwdriver,

put the screw driver in between the ball and the outside and

move it around the the ball and then pop the ball out. empty out

what ever's in there and use a hair dryer or a cloth to dry the

inside. pull off a stirp of felt froma chalk board earaser and make

sure it fits nicely in the top. fill the container with your choice of

ink and put the earaser nib on. put it against an upright surface

and squeeze lightly untill the nib becomes nice and juice with ink.

go and destroy shit!

__________________________________________________ __

tic tac mops

get 2 tic tac containers, opxy glue, tape, ink, nib.

take apart the white top from the clear container on both

throw away one of the white tops

with one white top and 1 of the containers make it so the white top is reversed and sitting on top of the opening,

then glue it to gether and tape it up

fill it with ink

glue a nib onto it

use the other container as a nib, there u go u got ur self a dope mini wide marker that has a cap.

__________________________________________________ _

ink recipe


its super easy and very dope!

1/3 mineral spirits or alchohool
2/3 anti-rust silver paint

tadammm! super drippy, totally opaque!

heres a few nice lil add-ins...

abit of fish oil (if buffed leaves a ghost tag)
brake fluid (same thing)
__________________________________________________ __

ill post some shit up later

The first useful post ive ever seen aker: the brownie baker, put up. Too bad you wouldnt know how to use one if you made one.


*CASE[SRC]

[aker88]

man shut the fuk up
why u so full of hate

[MC. SIK]

originally quoted by aker88

pull off a stirp of felt froma chalk board earaser and make

sure it fits nicely in the top

what is felt froma chalk eraser

originally quoted by aker88

1/3 mineral spirits or alchohool
2/3 anti-rust silver paint

can you use any paint besides silver

[aker88]

froma chalk eraser
is a chalk bord eraser that ur teacher got


yes u can use any paint but silver will come out best
has to be anti-rust

[aker88]

REVIVED !!!!

[MC. SIK]

lol thanks aker

mods can delete the other thread